CONDUCTOR PROPERTIES DATABASE – METRIC UNITS

The following conductor properties are used by the HST Software when sizing conductors for projects in Metric units for the following cable types:

String Conductors
DC Feeders
LV AC Feeders
MV AC Feeders
Bare Ground Conductors

Trade Size	Area (mm^2)	Diameter (mm)	No. Strands	Unit
1	1	1.29	7	mm^2
1.5	1.5	1.56	7	mm^2
2.5	2.5	2.01	7	mm^2
4	4	2.55	7	mm^2
6	6	3.12	7	mm^2
10	10	4.05	7	mm^2
16	16	5.13	7	mm^2
25	25	6.39	7	mm^2
35	35	7.56	7	mm^2
50	50	9.15	7	mm^2
70	70	10.86	19	mm^2
95	95	12.6	19	mm^2
120	120	14.15	19	mm^2
150	150	15.85	19	mm^2
185	185	17.64	19	mm^2
240	240	20.09	37	mm^2
300	300	22.46	37	mm^2
400	400	25.97	37	mm^2
500	500	29.05	37	mm^2

The following conductor properties are used by the HST Software when sizing conductors for projects in Metric units for the following cable types:

Overhead Conductors

Trade Size	Area (mm^2)	Diameter (mm)	No. Strands	Unit
200	200	0.743	18	mm^2
240	240	0.814	18	mm^2
280	280	0.879	18	mm^2
320	320	0.94	18	mm^2
400	400	1.04	36	mm^2
480	480	1.165	45	mm^2
640	640	1.345	45	mm^2
800	806	1.504	45	mm^2
900	900	1.602	84	mm^2
1100	1100	1.735	84	mm^2

Was this article helpful to you? No Yes