Step 1: To stop a search while running, click the “Stop Run” button on the left hand navigation bar within the Project Design Environment.
STOP A SEARCH
- Home
- Docs
- View User Manual
- CREATE AND EDIT A PROJECT
- STOP A SEARCH
STOP A SEARCH
- View User Manual
- TRADEMARKS AND DISCLAIMERS
- VIDEO TUTORIALS
- ACCESSING HELP AND SUPPORT
- OVERVIEW & REQUIREMENTS
- ACCOUNT MANAGEMENT
- CREATE AND EDIT A PROJECT
- CREATE A NEW PROJECT
- OPEN AN EXISTING PROJECT
- ARCHIVE/ UNARCHIVE AN EXISTING PROJECT
- RENAME AN EXISTING PROJECT
- CLONE AN EXISTING PROJECT
- CREATE A SITE BY UPLOADING KML FILES
- CREATE AND EDIT A SITE DIRECTLY WITHIN PLATFORM > SITE BOUNDARIES
- CREATE AND EDIT A SITE DIRECTLY WITHIN PLATFORM > EXCLUSION ZONES
- CREATE AND EDIT A SITE DIRECTLY WITHIN PLATFORM > POINT OF COMMON COUPLING (PCC)
- PERFORM TOPOGRAPHICAL AND SLOPE ANALYSIS
- SELECT OR UPLOAD WEATHER DATA
- GENERATE A DOWNLOADABLE KML FILE OF A SITE
- SELECT EQUIPMENT
- ENTER ELECTRICAL DATA
- ENTER CIVIL / GEOTECHNICAL DATA
- ENTER FINANCIAL DATA
- ENTER SEARCH PREFERENCES
- RUN A SEARCH
- STOP A SEARCH
- VIEW SEARCH STATUS
- OBTAIN AND MANAGE RESULTS
- REVISE THE PROJECT DESIGN
- PROJECT OPTIMIZATION SEARCH
- BASIS OF DESIGN > ENERGY SIMULATION AND MODELING
- BASIS OF DESIGN > ELECTRICAL ENGINEERING
- GOVERNING CODES
- REFERENCE STANDARDS
- SYSTEM CONFIGURATION
- NUMBER OF MODULES PER STRING
- CABLE ROUTING
- CABLE SELECTION AND SIZING
- CONDUCTOR PROPERTIES DATABASE – IMPERIAL UNITS
- CONDUCTOR PROPERTIES DATABASE – METRIC UNITS
- CABLE PROPERTIES DATABASE – IMPERIAL UNITS
- CABLE PROPERTIES DATABASE – METRIC UNITS
- WIRE LOSSES
- CIRCUIT IMPEDANCE
- TRANSFORMER SIZING AND IMPEDANCE
- TRANSFORMER PROPERTIES DATABASE
- BASIS OF DESIGN > STRUCTURAL AND GEOTECHNICAL ENGINEERING
- BASIS OF DESIGN > COST & FINANCE
- FAQs
- APPENDIX